- Use a newly formatted disk. Format it
on a PC using the FULL format not the quick method, or better still
but not always possible format the disk using a desk. Then copy the
program onto this disk.
- If the program only partly loads you
may find you cannot restart your desk, in this case, enter the AVOS
menu by placing a jumper on the AVOS link and powering up the desk.
Afterwards, try burning the program again.
For the Diamond 2/3 the AVOS link can be found on the edge of the MAP
card at the opposite end to the backplane connector. To set the AVOS
link on the other desks, follow this link: FAQ:How
to set the Program Links (Opens New Window).
|
